Installation of Park-it car stops with spikes
(Recommended for asphalt surfaces):
- Drill 1/2” diameter holes in the asphalt through the product’s holes
- Drive 1/2” rebar spike (14” long) through the holes in the product
Installation of Park-it car stops with lag bolts and metal shields
(Recommended for concrete surfaces):
- Use 1/2” or 5/8 lag bolts (6” long)
- Drill 1/2” dia. pilot holes through the product’s installation holes
- Remove the product, re-drill the holes for the diameter and depth required by the metal shields
- Install the metal shields, re-position the product and bolt with lag bolts
Click here for instructions on installing with glue
|
