|
|
 |
|
|
|
| The Car Stops parking curb is designed to effectively stop cars pulling into parking spots. It can also be used as effective curbing to create traffic circles, curb extensions etc. Molded bright reflective tape ensures visibility and pedestrian safety. Park-It is available in 3, 4 and 6' lengths and is installed with rebar spikes. |
|
|
|
|
|
 |
|
 printer friendly |
| Product Name: |
Rubber Car Stop |
| Models: |
6', 4', 3' long |
| Product Description: |
| 1. |
Material: compression molded composite of the 100% recycled rubber and polyurethane prepolymer |
| 2. |
Physical properties of the rubber composite: |
|
|
| a) |
Density |
0.6 oz/cu in |
(ASTM C642) |
| b) |
Durometer Hardness |
65A ± 7 |
(ASTM D2240) |
| c) |
Tensile Strength* |
minimum 210 psi |
(ASTM D412) |
| |
(* main structural areas) |
|
|
| d) |
Compression deformation |
10% at 70psi, 68°F |
(ASTM D575) |
| e) |
Brittleness at Low temperature: |
-40°F |
(ASTM D746) |
| f) |
Freeze and thaw when exposed to deicing chemicals |
|
(ASTM C672) |
| g) |
Coefficient of thermal expansion |
8 x10-5 in/in/°F |
(ASTM C531) |
| h) |
Weathering 70 hours at 158°F |
|
(ASTM D573) |
| |
- hardness retained
|
100% (± 5%) |
|
| |
- compressive strength |
100% (± 5%) |
|
| |
- tensile strength |
100% (± 5%) |
|
| |
- elongation retained |
100% (± 5%) |
|
| 3. |
Available models: 6', 4' and 3' long |
| 4. |
Basic dimensions and nominal weights as per attached drawings |
| 5. |
Finishing: Black with painted reflective yellow, blue or white parallelograms as per attached drawings |
| |
|
|
| |
|
| Installation methods: |
a) with spikes 14" long (minimum diameter ˝", recommended 5/8")
- 4 spikes for 6' model
- 3 spikes for 4' model
- 2 spikes for 3' model |
| |
b) with the lag bolts 6" long with 3" long lead shields (minimum
diameter˝", recommended 5/8")
- 4 spikes for 6' model
- 3 spikes for 4' model
- 2 spikes for 3' model |
| |
c) with polyurethane adhesive (recommended PL Premium)
- 300 ml. per 6' model
- 200 ml. per 4' model
- 150 ml. per 3' model |
| |
|
| Components: |
a) 100% recycled rubber from car and truck tires (NR, SBR) |
| |
b) polyurethane prepolymer for rubber granules |
| |
c) 2- component polyurethane coating for recycled rubber (yellow, blue,
white)
- tensile strength minimum 1,000 psi (ASTM D2370)
- UV stable
- elongation minimum 200% (ASTM D2370)
- abrasion maximum 20 mg loss (ASTM D4060) |
| |
d) glass beads |
| |
|
| Attached Drawings: |
6' model, drawing No. 34PC02V2
4' model, drawing No. 22PC02V2
3' model, drawing No. 17PC02V2
14" rebar spike, drawing No. 05SP01 |
| |
|
| |
|
| |
|
