Car Stops

The Car Stops parking curb is designed to effectively stop cars pulling into parking spots. It can also be used as effective curbing to create traffic circles, curb extensions etc. Molded bright reflective tape ensures visibility and pedestrian safety. Park-It is available in 3, 4 and 6? lengths and is installed with rebar spikes.

printer friendly

General description:

Safety Riders of required lengths are constructed using the
interlocking middle and the end cap modules. The standard foot print dimensions of each module are 35.4” by 19.7”. The end caps are with the similar footprint as the middle modules. The weight of the middle modules is 36 lbs each, the end cap modules weights 33 lbs. Each unit is bolted to a paved road surface using six lag bolts 3/8” dia. through a plastic shield installed in the road surface.

Dimensions of the modules:

- width 35.4” (+/- 1/16”)
- length 19.7” (+/- 1/8”)
- thickness 2” (+/- 1/8”)

Dimensions of the Safety Rider:
(the length of Safety Rider is adjustable)

- width 35.4”
- length: as required by 19.7” increments
- height: 2”

Material:

Compression molded 100% recycled synthetic and natural
rubber and polyurethane composite

Physical properties:

- tensile strength: minimum 500 psi
- shore hardness: minimum 70A
- specific gravity 1.1-1.5

Marking:

rubber modules are available in black with yellow or white
reflective tape

Installation method:

-	each module is affixed to the pavement with six zinc plated steel lag bolts 3/8” x 4”, plastic polypropylene shields and 3/8” zinc plated steel washers supplied with the modules
-	9/16” diameter holes are drilled through the holes in the modules into a paved road.
-	the plastic shields are installed in the mounting holes with the provided installation tool
-	the lag bolts are inserted into mounting holes and tightened (do not over tighten the bolts)

Installation tools:

-	chalk line, measuring tape, heavy duty hummer drill, 9/16” dia. by 10” long carbide tip drill bits, installation tool for plastic shields, 11/16” drive socket with a power tool, portable blower, utility knife, crow bars
-	installation tool for the plastic shields is supplied for the initial installation job only
-	additional bolts, shields, washers, and installation tools can be purchased from Traffic Logix

Warranty:

A two (2) year warranty is provided on all Safety Rider
components installed as per the manufacturer’s installation
instructions.




	Rubber- Traffic Logix Car Stops are made from recycled rubber tires. Rubber is lighter and easier to work with than asphalt and concrete, significantly minimizing the number of hours that need to be invested to install the solutions. Rubber pieces can be pulled up and moved without being destroyed. This is convenient for municipalities that want to institute temporary measures to test an area and is also a safety measure so that products can be stored during the winter to prevent snow plow damage. Unlike concrete and asphalt which necessitate frequent and high cost replacement, rubber products are long lasting and cost-efficient. In addition to long term benefits, rubber products offer a quick, easy way to install solutions when timing is key.

	Easy installation- Traffic Logix Car Stops are simple to install. They are secured into asphalt with spikes or into concrete with lag bolts and metal shields. They do not require skilled labor to install.

	Molded Reflective Tape- Each Traffic Logix car stop is embedded with highly reflective tape. This tape is a safety feature to ensure that drivers can clearly see the panel both during the daytime and at night. Traffic Logix uses this tape on its products instead of paint since paint often fades away within months and the reflective tape can last for several years. Tape is available in several color choices. Highly reflective cat's eyes can be installed on any device for further enhanced visibility.

	Environmentally Friendly Design- Traffic Logix Car Stops are made from recycled rubber tires. This ensures that while products address community health and safety needs, they are also friendly to the environment. An additional benefit of the product’s green design is that it can help municipalities obtain funding for the products since many areas have a budget allocation for recycled products.

	Hear what our customers have to say about our products.