General description: |
The Rubber Curbs are used to construct curbs, bulb-outs, traffic
circles, and traffic islands.
The weight of each unit of the curb is 13.2 lbs.
Each unit is bolted to a paved road surface using three lag bolts
3/8” dia. through a plastic shield installed in the road surface. |
|
|
|
|
Dimensions of the modules: |
- width 3.125” (+/- 1/16”)
- length 31.25” (+/- 1/8”)
- height 4” (+/- 1/8”) |
|
|
|
|
Dimensions of the Traffic Circle: |
- minimum inside diameter: 6.5 feet
|
|
|
|
|
Material: |
Compression molded synthetic and natural rubber |
|
|
|
|
Physical properties: |
- density: =68 pounds per cubic foot
- tensile strength: 800 psi
- durometer shore hardness: 70A
- specific gravity: 1.4
- elongation: 160% |
|
|
|
|
Marking: |
- |
rubber curbs are available in black or red brick color |
- |
each unit can be marked with either four reflective strips of
white or yellow tape 1.5” by 3.75” each |
|
|
|
|
|
Installation method: |
- |
each curb unit is affixed to the pavement with three zinc
plated steel lag bolts 3/8” x 4”, plastic polypropylene shields
and 3/8” zinc plated steel washers supplied with the units |
- |
9/16” diameter holes are drilled through the holes in the units
into a paved road. |
- |
the plastic shields are installed in the mounting holes with the provided installation tool |
- |
the lag bolts are inserted into mounting holes and tightened
(do not over tighten the bolts) |
|
|
|
|
|
Installation tools: |
- |
measuring tape, heavy duty hummer drill, 9/16” dia. by 10” long carbide tip drill bits, installation tool for plastic shields,
11/16” drive socket with a power tool, portable blower, utility
knife, crow bars |
- |
installation tool for the plastic shields is supplied for the initial
installation job only |
- |
additional bolts, shields, washers, and installation tools can
be purchased from Traffic Logix |
|
|
|
|
|
Warranty: |
A two (2) year warranty is provided on all rubber curb
components installed as per the manufacturer’s installation
instructions. |
| |
