General description: |
Speed Humps and Speed Tables of various dimensions are
constructed using interlocking modules (US patent pending
12633-23USPR). The standard foot print dimensions of each
module are 18” by 42”. The weight of the various modules is
between 50 and 100 lbs.
Each unit is bolted to a paved road surface using six lag bolts
3/8” dia. through a plastic shield installed in the road surface.
The Traffic Logix proprietary two directional tongue and grove
interlocking system provides additional connection between the
modules and increases stability of the speed hump or speed
table. |
|
|
|
|
Dimensions of the modules: |
- width 18” (+/- 1/16”)
- length 42” (+/- 1/8”)
- thickness 3” (+/- 1/8”) |
|
|
|
|
Dimensions of the Speed Humps/Tables:
(width and length of
speed hump are adjustable) |
- width from 7’ up, by 3.5’ increments
- length: according to a street width, from 6’ by 1.5’ increments
- height: 3” or 4”
|
|
|
|
|
Standard dimensions of the Speed Humps/Tables: |
- width 7’, 14’, 21’
- length: according to a street width
- height: 3” or 4” |
|
|
|
|
Entrance and exit gradient: |
1:15 |
|
|
|
|
Side gradient: |
1:3 |
|
|
|
|
Material: |
Compression molded 100% recycled synthetic and natural
rubber composite |
|
|
|
|
Physical properties: |
- tensile strength: minimum 500 psi
- shore hardness: minimum 70A
- specific gravity 1.1 |
|
|
|
|
Marking: |
rubber modules are available in black or
black with yellow reflective tape or
black with white reflective tape |
|
|
|
|
Installation method: |
| - |
each module is affixed to the pavement with six zinc plated
steel lag bolts 3/8” x 4”, plastic polypropylene shields and
3/8” zinc plated steel washers supplied with the modules |
| - |
9/16” diameter holes are drilled through the holes in the
modules into a paved road. |
| - |
the plastic shields are installed in the mounting holes with
the provided installation tool |
| - |
the lag bolts are inserted into mounting holes and tightened
(do not over tighten the bolts) |
|
|
|
|
|
Installation tools: |
| - |
chalk line, measuring tape, heavy duty hummer drill, 9/16”
dia. by 10” long carbide tip drill bits, installation tool for
plastic shields, 11/16” drive socket with a power tool,
portable blower, utility knife, crow bars |
| - |
installation tool for the plastic shields is supplied for the initial
installation job only |
| - |
additional bolts, shields, washers, and installation tools can
be purchased from Traffic Logix |
|
|
|
|
|
Warranty: |
A two (2) year warranty is provided on all Speed Hump/Table
components installed as per the manufacturer’s installation
instructions. |
| |
|
